Vishay Intertechnology has released 10 new AEC-Q101-qualified FRED Pt Gen 5 600V ultra-fast and ultra-fast rectifiers for automotive applications. Rectifiers are available in TO-247AD and to-220AC packages and Type X ultra Fast and Type H Ultra Fast speed classes, roHS compliant and halogen-free, and components offer high temperature operation TO +175C.
Mouser has collaborated with Bourns on a new e-book. Each article provides useful links to key Bourns surge protection products, relevant designers with the right solutions that can give their electronic designs a direct benefit. Equipment operation, performance and improved equipment reliability life provide a higher level of overload protection for a wide range of applications, the company'S TBU-CA-Q is the Atomic Energy Commission standard -- Q101, low capacitance, bidirectional, high-speed protection element, can prevent short circuit failure
The Edge AI solution combines Variscite's I.MX 8 platform with Hailo's Mini PCIe AI module, allowing enterprises to run full-size DLC-based applications more efficiently and sustainably while significantly reducing costs. Variscite's DART-MX8M-Plus and Var-SOMM-MX8M-Plus are based on NXP'S I.MX 8M PLUS SoC, with integrated AI capability up to 2.3TOPS. The SoMs integrates Hailo's mPCIe AI module with a compatible Basler camera, providing 30FPS and running YOLOv5m FHD resolution simultaneously with minimal power consumption.
The new series of GPS/GNSS timing antennas offer first-class axis ratio and higher accuracy of receiving satellite timing signals, as well as 2dB of high gain, low noise and high out-of-band suppression, enabling the use of longer, low-cost cables and simple and flexible installation. These antennas have built-in surge protection and support a wide range of GNSS, including GPS, GLONASS, Beidou, GALILEO and Iridium
Rohde & Schwarz R&S ATS1800C is an innovative technology pioneer in OTA testing. The device is a highly flexible solution that supports methods such as thermal testing and out-of-band testing. With the addition of the new side chamber option, the device now also supports RRM testing for two AOAs. And in contrast to the single CATR R&S ATS1800C, the ATS1800M offers four CATR reflectors, each with an unmatched 30cm QZ.
Renesas Electronics has released a new set of powerful MCU, the RH850/U2B MCU, to meet the expanding need to combine multiple applications into a single chip and achieve a unified ECU for evolving electrical and electronic architectures. The INTEGRATED hypervisor hardware virtualization assistance of the MCU provides multiple software systems up to ISO26262 ASIL D functional security level, running independently with high performance and no interference
The B9083FTG supplied by Toshiba Electronics Europe LTD will be used in many automotive applications together with brushless DC motors, including EPS systems and electric brakes. The new device is a three-phase gate driver used to drive an external N-channel power MOSFET of a three-phase brushless DC motor. The equipment complies with ISO 26262 2nd edition and supports ASIL-D, the highest functional safety rating. The driver consists of three pre-drive channels and can operate at -40 ° C with a maximum ambient temperature (Ta) of +150 ° C or a maximum junction temperature (Tj) of +175C
The IOSC EVBoard is available in six smaller sizes that can be snapped off the motherboard and can be welded to quad-pad oscillators of different sizes. The board offers three configurations for output signals, and the evaluation board offers two options - as an unfilled PCB with a proper BOM, and as a filled board for immediate use
The Cincons CFM series, CFM50S, is a new open power supply offering 50W stabilized power with a universal input range of 90-264VAC and a compact size of 2 "x 3". Delivers up to 89% efficiency and a wide operating temperature range of -30C to +80C, can be used at altitudes up to 5000m, and provides low no-load input power consumption of less than 150mW
The m5Stack K034 Tough ESP32 IoT Development Board Kit is an industrial-grade programmable embedded controller equipped with a dual-core low-power Xtensa 32-bit LX6 microprocessor with a clock frequency up to 240MHz. Ideal for industrial control, intelligent building, outdoor node data acquisition, and other applications.
The component combines the automotive industry standard FAKRA connector with the popular SMA connector to accommodate applications such as antennas, RFID and ADAS. The new 50-ohm assembly has a fastenable FAKRA interface on one end and a threaded SMA interface on the other. The cable assembly is available in several standard lengths on flexible RG-58 and RG-174 cables and provides reliable electrical performance up to 3GHz
Mouser released a new ebook in partnership with Maxim Integrated(now part of the Analog Device). The new ebook provides detailed insights into meeting these performance requirements while building lighter and smaller devices. The high-speed comparator provides a typical propagation delay of 280ps and overdrive dispersion of as low as 25ps, ideal for ToF, distance measurement applications.
GTK has added a new high-resolution 10.1 "TFT display to its large portfolio, offering a low-profile, compact design and adopting a MIPI interface that generates high-speed signals. The panel displays WUXGA 1920 x 1200 resolution and offers an integrated 34-pin ZIF connector located on the back of the device.
Rohde & Schwarz has added its R&S Spectrum Rider FPH series, offering a new base model for measuring frequencies up to 44GHz. The new higher frequency model allows the device to perform a wider range of measurement tasks. With high sensitivity of -160dbm, measurement accuracy between 10MHz and 3GHz is typically 0.5dB, providing class leading RF performance. The 44GHz model weighs just 3.2kg and is optimized for mobile applications
Provertha produces a compact, fully shielded distribution system for the M8/M12 cable. It simplifies the connection between the equipment and the wired network and saves the cost. The solution is a flexible adaptable plug and play system that optimizes the wiring for the specific situation of the application, and the plug connection on the branch box (branch box) can also be configured with a rotatable lock compared to a traditional I/O branch box (branch box)
Renesas Electronics has released what it claims is the industry's first industrial temperature DDR5 (5RCD0148H) and DDR4 (4RCD0232K) Registered Clock driver (RCD). The new industrial temperature RCD supports temperatures as low as -400 ° C and as high as 1050 ° C, while commercial temperature devices typically operate between 0 ° C and 700 ° C. The device offers 2X channel speed improvements, low latency and excellent power management, allowing DDR5 industrial temperature memory and memory downtime applications.
EC1001P capacitors offer ultra-low thickness (150µm, not including gaskets), allowing advanced assembly under strict height restrictions (processor packs, BGA floor, embedded packs, etc.). EC1001P capacitors offer ultra-low thickness (150µm, not including gaskets), allowing advanced assembly under strict height restrictions (processor packs, BGA floor, embedded packs, etc.).
ShowMeCables has released its new line of fiber optic transceivers that are MSA-compatible and compatible with most switch and router platforms. The form factors provided are gic, SFP, SFP+ and XFP, with range selection ranging from 220 m to 120 km, and three emission wavelengths available - 850nm, 1310nm and 1550nm
