the Texas Instruments C7200 time to digital converter (TDC) is aimed at ultrasonic sensing measurements such as water flow meter, gas flow meter and heat flow meters. When paired with the TDC1000 (ultrasonic analog-front-end), the TDC7200 can be a part of a complete TI ultrasonic sensing solution that includes the MSP430, power, wireless and source code.
TE Connectivity’s miniature high-sensitivity DPDT PCB-mount latching relays are suitable for wide range of demanding needs. The 5V P2 V23079 Series slimline two-pole polarised telecom and signal relay measures just 15mm x 7.5mm x 9.8mm. Features include bifurcated gold-plated contacts, immersion cleanable, RTIII, IP67, V-0 flammability classification and insulation resistance at 500VDC of >109ohm.
The Global Specialties 1320 triple-output high-resolution DC power supply provides 200VA continual output power through its three output supplies. 1320 power supply features constant current or constant voltage modes with automatic crossover.
Texas Instruments’ TPS2474x series integrate ORing and hot-swap controllers for 2.5V to 18V systems. The devices offer precise and programmable protection settings that help the design of high-power, high-availability systems where isolating faults is critical.
Texas Instruments (TI) has introduced the first power management chipset with intelligent digital control and a ‘unique’ body-diode sensing feature to optimize secondary-side synchronous rectification in next-generation AC/DC and isolated DC-DC power supplies.
Amphenol’s Industrial ePower series connectors are designed for the demanding requirements such as hybrid, electric vehicles and utility truck electrical systems. The connectors are ideal for systems operating at 800VDC to 1000VDC with a 200A to 500A rating. They incorporates patented RADSOK technology for higher current, lower T-rise, less resistance and mating force.
Luminus Devices CBT-39-UV LEDs are designed to provide intense optical power densities and replace arc and halogen lamps when traditional high-power LED arrays can’t be used. The device emit photons uniformly over the entire LED chip surface, maximize light extraction and efficiency and allow for flexible optical designs.
Microchip’s Andrew Rogers look at the advantages of HSIC over USB and the connection procedures that are involved. The high-speed inter-chip (HSIC) interface is becoming more popular due to its notable advantages over USB for hard-wired inter-chip applications.
Rohm’s BD9G101G simple step-down switching regulators are featuring integrated internal high-side 42V power MOSFETs. The devices provide 0.5A DC output with a fixed 1.5MHz operating frequency, allowing the use of small inductors and ceramic capacitors. They have built-in phase compensation components and are available in SOT-23-6 (SSOP6) package.
Recom has produced a new publication – the ‘DC/DC book of knowledge – Practical tips for the user’, a 234-page publication for engineers, power-supply designers and students.
Analog Devices has introduced an absorptive single-pole, double-throw (SPDT) switch specified for the 9kHz to 13GHz frequency band, with high isolation of 48dB and low insertion-loss of 0.6dB at 8GHz operation. The HMC1118LP3DE is the first offering within ADI’s new RF and microwave control product portfolio to exhibit the inherent advantages of silicon process technology, which offers critical advantages over legacy GaAs (gallium-arsenide) RF switches.
Alliance Memory has announced that its 32M x 16 MT48LC32M16A2P-75: C (commercial temperature), 32M x 16 MT48LC32M16A2P-75 IT:C (industrial temperature), 64M x 8 MT48LC64M8A2P-75:C (commercial temperature), and 64M x 8 MT48LC64M8A2P-75 IT:C (industrial temperature) 512M synchronous DRAM (SDRAM) devices, which the company recently acquired from Micron Semiconductor, will be available with their original Micron part numbers into 2017.
TRP Connector / Bel single-port jacks are designed to meet the demanding requirements of high-performance communication environments. They are available in horizontal and vertical orientations, various speeds, and with single or bi-colour LEDs. TRP jacks offers the versatility and reliable solution for networking or mobile applications, says the company.
The latest addition to the popular LCM family of AC/DC power supplies from Artesyn Embedded Technologies is the LCM1000 series. The new 1000W models continue the family reputation for high efficiency and reliability at a competitive cost for industrial and medical equipment.
The Texas Instruments’ CC2650STK SimpleLink Bluetooth Smart SensorTag loT Kit is designed to assist design engineers to realize cloud-connected product ideas. The new SensorTag now includes ten low power MEMS sensors in a tiny red package. It is expandable with DevPacks to make it easy to add your own sensors or actuators.
Texas Instruments’ ADC34J2x family devices are a high-linearity, ultra-low power, dual-channel, 12-bit, 50-MSPS to 160-MSPS, analog-to-digital converters. They are designed specifically to support demanding, high input frequency signals with large dynamic range requirements.
Honeywell’s HumidIcon digital humidity / temperature sensors are available with RH accuracy levels between ±4.5%RH (HIH 6100 Series) up to ±1.7%RH (HIH 9000 series). Designers can now easily choose the right sensor with the right level of accuracy to meet total system needs, without compromising reliability.
Murata’s cost-effective new NXE1 series 1W Insulated DC-DC converters have a profile 30% lower than the 7mm height industry norm, making them ideal for designs where space constraint is an issue. The NXE1 has the additional advantage over competing SMD DC-DC converters of being manufactured using automated processes that greatly improve overall product reliability and deliver consistent performance characteristics.
