Infineon Technologies introduces SEMPER™ Nano NOR Flash memory. The memory is specially optimized for use in small, battery-powered electronic devices. New wearable and industrial applications such as fitness trackers, smart headsets, health monitors, drones and GPS navigation are emerging, helping to achieve more functions such as accurate tracking, recording critical information, enhancing security and reducing noise
Infineon has introduced SECORA™ Connect X, an all-in-one turnkey NFC solution. This ultra-low-power enhanced NFC solution clears the way for EMVCo standards-based payments.
The IRS2980S utilized the control and high voltage technologies of International Rectifier Corporation to achieve a simple, high-performance step-down LED driver solution. The solution is based on hysteresis output current regulation and typically operates in the range of 25 kHz to 120 kHz.
The CY22381 is a next-generation programmable Flash programmable clock for networking, telecommunications, data communications, and other general purpose applications. The CY22381 offers up to three configurable outputs in an 8-pin SOIC, powered by a 3.3V power supply.
The IR2011 is a high-power, high-speed power MOSFET driver with a separate high-low side reference output channel. A floating channel can be used to drive a high-side configuration of N-channel power mosFETs that operate at up to 200 volts. Proprietary HVIC and latch-immune CMOS technology enable a rugged overall structure.
IRAM336-025SB is a multi-chip hybrid IC for low power electrical motor control applications such as fans, pumps and refrigerator compressors. A compact Single in line (SIP-S) package minimizes PCB space. Several built-in protection features such as temperature feedback, shot prevention, undervoltage locking and shutdown input make this a very powerful solution.
The IR3596 is a flexible single-loop digital polyphase step-down controller that can be configured as a 1, 2 or 3 phase system when combined with an IR Dual 6x8mm IR3548 or IR355x power level. Power consumption is minimized while maintaining full digital capability and flexibility. Digital nonlinear transient control allows low frequency operations to achieve maximum efficiency while providing minimal all-ceramic output capacitance solutions.
The IRU3027 controller IC is specifically designed to meet VRM 9.0 specification for next generation microprocessor applications requiring multiple on-board regulators. The IRU3027 provides a single chip controller IC for the Vcore, three LDO controllers, one with an automatic select pin that connects to the Type Detect pin of the AGP slot for the AGP VDDQ supply, one for GTL+ and the other for the 1.8V chip set regulator as required for the next generation PC applications.
The PVG612 Series Photovoltaic Relay is a singlepole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier’s proprietary HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator.
The XMC7200 is the XMC7000 microcontroller family for industrial applications. The XMC7200 has two Arm Cortex-M7 cpus for primary processing and one Arm Cortex-M0+ CPU for peripherals and security processing. These devices include embedded peripherals that support controller Area Networks (CAN FD) with flexible data rates and Gigabit Ethernet.
Infineon Technologies has announced the launch of the new XENSIV TLE4971 series of magnetic current sensors to further enrich its automotive current sensor portfolio. The series of magnetic current sensors can also be used in a variety of industrial applications, such as electric vehicle DC chargers, industrial drivers, servo drivers, photovoltaic inverters, etc.
The MERUS multi-level switching technology launched by Infineon Technology Co., Ltd. aims to reduce switching loss and achieve efficient audio amplification performance at low output power and high output power, bringing significant advantages to such applications.
Infineon Technologies has launched the XMC7000 series microcontroller (MCU) for industrial drive, electric vehicle (EV) charging, electric two-wheelers, robotics and other advanced industrial applications.
XDPS2221 PWM controller is a highly integrated device, which combines a multi-mode AC DC PFC controller and a multi-mode DC DC hybrid flyback controller. The integration of PFC and hybrid flyback into a single package can reduce the bill of external material components and optimize the system performance in two stages.
Infineon Technologies EVAL-M1-IM323 Evaluation Board was developed to support users in designing 3-phase motor drive applications with the IM323. The IM323 CIPOS tiny 3-phase inverter module delivers a high power density variable speed motor drive.
The continued demand for artificial intelligence (AI) services in high performance computing (HPC) data centers is driving the growth of the market in this area. Dedicated AI accelerators can help dramatically improve the performance and efficiency of these data centers. As with many critical infrastructure systems, reliability and high availability are essential to these data centers, but extremely difficult to achieve.
Infineon's latest 8 Mbit and 16 Mbit EXCELON F-RAM (Ferroelectric Access Memory) began to be delivered in bulk. This series of memory is the serial F-RAM memory with the highest power density in the industry, which can meet the requirements of the new generation of automotive and industrial systems for nonvolatile data recording and prevent data loss in harsh working environments
